Signup to receive email updates




or follow our RSS feed

Authors


John Fulton


John Fulton
Former County Extension Director



Blog Archives

732 Total Posts

follow our RSS feed

Blog Banner

In The Backyard

Horticulture columns and tips done on a timely basis

Pruning Evergreens

Posted by John Fulton -

This is the time of year to wrap up pruning chores on evergreens. This includes both needle-type and broadleaf evergreens. If you're wondering what a broadleaf evergreen is, that includes holly, rhododendron, and azalea. The logic behind pruning your yews at this time is to allow sufficient time for regrowth to become hardened off before winter, and to keep new growth from becoming too rank before the winter months.

Pruning evergreens is part art and part science, but mostly art. A few simple rules to follow make the job results much more pleasing. Upright growing evergreens, such as pines and spruces, should not have the main leader cut off. This will destroy the natural shape, and will make the resulting growth more susceptible to breaking off. If individual branches are being cut off, they should be cut back to a bud. This will allow the bud to become the new main branch. You can also control growth direction of branches in this way. If you are growing trees for cut Christmas trees, all bets are off, as you are only dealing with trees through the first seven years of their life or so.

Make sure you use the proper equipment. Individual pruning cuts are best done with bypass loppers or pruning shears. These make clean cuts without much damage to the remaining wood. The old anvil type shears and loppers cut to a point, then crush the remaining wood. For yews, junipers, and arborvitae that are trained to a certain size of shape, you will want to use hedge shears (electric or manual) that are sharp and properly tightened. Most of these types of shears can cut up to about a quarter of an inch in size.

When pruning evergreens, remember the dead zone. This is the area toward the center of the plant that doesn't receive much light. It also has few needles or active buds. Cutting into the dead zone will cause many years (or forever) of little green growth. Also remember to prune so that the base of plants is wider that the top. This allows sunlight to hit the bottom area as well, and keeps the bottom from dying up.



Please share this article with your friends!
Share on Facebook Tweet on Twitter