Treat stains as soon as possible after staining. The older the stain, the more difficult it will be to remove.
All stain removal methods should be applied prior to laundering washable garments. Stains that have been laundered and dried are almost impossible to remove.
What you will need
- Dull knife
- Wet vacuum (for spilled liquid)
- 3% Hydrogen peroxide
Steps to Clean
- Blot up as much of the stain as is possible by blotting with a white paper towel or scraping with a dull knife. A wet vacuum is useful if a large quantity of liquid was spilled.
- Apply a small quantity of detergent solution to the spot. (To make the detergent solution mix 1/4 teaspoon of a hand dishwashing detergent which does not contain lanolin or bleach with 1 quart of water) Use a blotting motion to work the detergent into the affected area. If spot is being removed continue applying detergent and blotting with a white paper towel until spot is removed.
- Rinse with tap water using a spray bottle, blot to remove excess moisture.
- Spray lightly with water, do not blot this time; apply pad of paper towels and brick and allow to dry.
- If there is still some stain on the carpet and blotting is not removing it, then moisten the tufts in the stained area with 3% hydrogen peroxide. Let stand for on (1) hour. Blot and repeat until carpet is stain free. Light will cause peroxide to change back to water so no rinsing is necessary. Apply pad of paper towels and weight down with brick.